02-14-2022 01:15 PM
Solved! Go to Solution.
02-24-2022 03:31 PM
Hi Bobby,
For using Eth1 port to connect device like computer or printer the AP250 or AP410c requires 'AT' 30 watt PoE+ power and set the port to access or trunk port.
Please following article/guide for reference.
https://extremeportal.force.com/ExtrArticleDetail?an=000078279&q=eth1%20port%20pass%20through
Regards,
Benjamin Tam
Senior Technical Support Engineer / Extreme Networks
Btam@extremenetworks.com
Office 1-800-872-8440
ExtremeNetworks.com
Advance with Us™
02-24-2022 03:31 PM
Hi Bobby,
For using Eth1 port to connect device like computer or printer the AP250 or AP410c requires 'AT' 30 watt PoE+ power and set the port to access or trunk port.
Please following article/guide for reference.
https://extremeportal.force.com/ExtrArticleDetail?an=000078279&q=eth1%20port%20pass%20through
Regards,
Benjamin Tam
Senior Technical Support Engineer / Extreme Networks
Btam@extremenetworks.com
Office 1-800-872-8440
ExtremeNetworks.com
Advance with Us™