Pass-Thru on an AP

[bobby_clowers]

We have AP250's and AP410c's and I was wondering if we could use the second eth port as like a pass-thru to a computer.   For some reason back in the day I think I saw something on this but can't remember what all it said.   What we want to do is connect the AP to the network for a wifi device, but use the second eth port to connect a teacher computer to the wired side of the network.  Is this possible?

[BenjaminT · Accepted solution]

Hi Bobby,

For using Eth1 port to connect device like computer or printer the AP250 or AP410c requires 'AT' 30 watt PoE+ power and set the port to access or trunk port. 

Please following article/guide for reference.

https://extremeportal.force.com/ExtrArticleDetail?an=000078279&q=eth1%20port%20pass%20through

Regards,
Benjamin Tam

Senior Technical Support Engineer / Extreme Networks
Btam@extremenetworks.com
Office 1-800-872-8440
ExtremeNetworks.com
Advance with Us™