ExtremeControl
Questions and discussions abpit ExtremeControl.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

NAC Notification showing the wrong user

Hello together, I tried to setup a notification in case someone removes a MAC form an End-System Group (Blacklist). So the trigger works fine and I get an mail as I wished to.I modified the text in the mail to get the needed information. Now the prob...

a749be202bcd49a591a2b2a02e52652e_34e92dec-f91a-40a4-bc51-f41d1aaf3d39.png a749be202bcd49a591a2b2a02e52652e_03ed510d-9e1a-4da9-a9a8-1837f18c15d2.png a749be202bcd49a591a2b2a02e52652e_1462b405-e84b-4f4d-b2ae-2264ae200a2f.png
Nico_A_ by New Contributor III
  • 780 Views
  • 0 replies
  • 0 kudos

Resolved! Problem with 802.1X Microsoft Machine authentication

Hello All,Having a problem with 802.1X Microsoft Machine authentication:We are using XMC 8.5.4.23 and X435-8P-4S with EXOS 31.2.1.1.Config of X435 is:In fat the most relevant partsconfigure vlan default delete ports allconfigure vr VR-Default delete ...

Resolved! XMC NAC - Control devices and block old OS

Hi @all, we are using the XMC for the NAC control. Now we search for a solution to block old OS version’s like Windows XP, Windows Server 2003 and so on. Is it possible to do this with the NAC. At the moment we are using on the Switches the naclogin....

End-System reason 'End-System Session Detected'?

Hi,Have recently migrated a mobile providers APN device over to Extremecontrol. In the example below the third line down is a legitimate authentication requested from a mobile device, and these use PAP to authenticate.  The question is in relation to...

13c1ac6a01d94e32b4d9e775bd40b043_e3f6bd8a-4f0b-499b-bdb6-8ed55889e67e.png
Anonymous by Not applicable
  • 837 Views
  • 0 replies
  • 0 kudos

Resolved! end point printers losing ip address in xmc

on Extreme 460 G2 having an issue with a stack.  End point user reports that printers lose IP’s addresses.  This morning was testing and disable netlogin for dot1x and mac took the port of XMC and printer works fine and is now pulling an ip address. ...

harleyguy by New Contributor
  • 1578 Views
  • 1 replies
  • 0 kudos
GTM-P2G8KFN