ExtremeSwitching (EOS) - Page 23 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

does the B5 switch pass DSCP packets by default or does it require additional configuration ?

i have a router configured with DSCP tpackets for Voip connected to a B5 switch. the switch is at default configuration ( no vlan) and will be used route voip traffic only to the connected IP phones. is there any configuration required for the switch...

Black Diamond X8 Management Plane Module

Dear All Expert , Good Day. I would like to ask a question as below For X8 Chassis Switch having 2 management module and one of the management module is without OS and another management module is with OS. May I know how to add the OS image to the ...

Matrix N7 Platinum - Access Lists

Hello guys, Can someone tell me if 7G4202-72 devices allow me to deploy ACL’s? When entering the “router mode” I see that the access-list command exists and I can create some rules, however they’re not working as expected. As a small test, I’ve...

mirror a 10Gb port to a 1Gb

Hi guys, I am fairly new to the Extreme networks and any opinion would be highly appreciated. The question is: Is it possible to mirror a 10Gb port to a 1Gb port on a C5 switch? If it is possible, what happens, when the traffic exceeds the 1Gb speed?...

MIS USUARIOS DE ENTERASYS ESTÁN DES HABILITADOS

Hola, espero que alguien tenga una respuesta concreta a mi pregunta, la cuestión es que tengo un switch enterasys C5k125 y el B5 también, sucede que al ingresar erróneamente mis contraseñas en los usuario ADMIN y RW, posteriormente me dice que los us...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN