Sometimes NAC reports the wrong client IP because switch ports "nodealias" contains too much entries or old entries. On EXOS Switches i can run a "clear nodealias port X" and after a few seconds the ip is displayed correctly. How can i do that on ...
https://cloud-wiki.rnd.ki.sw.ericsson.se/index.php/Troubleshooting_Watchmen/16A#Missing_alarms.2Falerts In the above link I have found an example, where an active alarm can be created. I am able to create history alarms but just thinking of execu...
Hello, We currently have an alarm setup which contains the following trap: iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremeStackable.extremeStackableTraps.extremeStackTrapsPrefix.extremeStackMemberStatusChanged 1.3.6.1....
I have a situation that requires 4 auth sessions on a single B5 port. From this port there is an 8 port Ubiquiti switch, then 3 devices from there. The Ubiquiti switch is showing 2 MACs to the B5, so it is taking up 2 of my 4 available sessions. I...
We previously had QoS configured and could see our VoIP traffic tagged with EF. We replaced our switches with Summit x440 and 460 G2 models, replaced our phones, and implemented Extreme Management Center and somewhere along the line things broke. Tr...
