code:Hello,I have three switches, 1 210-24p-GE2, 2 210-48p-GE4 and I need to cascade the 24-port to the 48, but at the time of doing so and connect a phone on the 24-port switch the phones do not receive ip addressing and if I connect a phone to the ...
I've followed these instructions to reset the password and can console into the device without a problem, but try as I might I can not access the device via the web interface or telnet. Is there some trick I'm missing? Thanks https://community.extr...
I have a problem to get a 100 Mbit SFP MGBIC-LC04 working in an old 7G4270-12 DFE-module. I get no link. When I tried to configure the port for 100 Mbit I got error message: ss097a(su)->set port speed ge.7.12 100 default speed 100 mbps no...
Hi, I searched for VLAN traffic prioritization on GTAC knowlegebase and found these commands: set policy profile 1 name "PriorityForPhones" cos-status enable cos 5 set policy rule admin-profile vlantag 10 admin-pid 1 These commands gives "cos 5" p...
Dear all. On and off I need specific legacy firmware versions for Enterasys devices running EOS. C-Series, B-Series, etc. Since we have a new portal, I do not find all the old versions for all legacy EOS products. Some are there, but not all. Fo...
