Nous avons des commutateurs 8G20G4-48P qui n'alimentent plus l'équipement téléphonique et les caméras de notre société. Lorsque je clique sur "POE Port Settings" ou "POE System Settings", je ne trouve aucune configuration.
I have just added a 450g2 to my environment. Ideally, i'd have more than 1 fiber strand going from this idf to the MDF where the 670s reside. Those 670's run vrrp. Each fiber uplink would go to an interface on one of the 670s. Right now, i only have ...
I have noticed on S4 chassis equipped with I/O fabrics modules that transceiver leds are blinking with 2 different colours: most of them are green, but some are amber (see enclosed images - I hope it is visible). Anyone knows what that colours mean ...
Hi, Have a OSPF issue that I must be missing something obvious. Basically I have some EXOS devices activing as the core OSPF backbone area. At the edge I am using a EOS C5 switch configured as an OSPF Stub area. The two have created a neighbourship...
Hello, My port don´t work and the switch show the following message: <163>May 14 12:59:20 XX.XX.XX.XX bcmStrat[11.tMiiDbnc]MacDrainTimeOut:port 5,ge1, timeout draining packets (75 cells remain) <163>May 14 12:59:20 XX.XX.XX.XX bcmStrat[11.tMiiDbnc]s...
