ExtremeSwitching (EOS) - Page 4 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

IGMPv2 querier election issue

Hello,I'm new to the multicast protocol. On my switches, the igmp snooping is enabled per-port, version 2, on all of them. I have several vlans configured on the switches.I set on one switch an IP on vlan29, and I have an IP on the management vlan. S...

Disable micros-usb port on 7100 series switch

Is there a command to disable the micro-usb port on the 7100 switch running EOS?I see you can "disable switch usb" in EXOS, and I am looking to perform the same task as this command in EOS.

Converting Avaya Config to Extreme Config

Hi All,I am new to networking however l have been looking through documentation trying to find a good resource to help translate configs (Avaya Config to Extreme Config EXOS): ! *** Interface ***!interface FastEthernet ALLauto-negotiation-advertiseme...

the extreme equivalent for controlled-direction

We have devices that doesn't show their mac when the link comes up. This is a common practise in network enabled doorlockers like the Paxton or Salto brands . These access devices have to be triggered by for example an arp request.How to configure ma...

LOCAL LOGIN NOT WORKING

Hi Everyone,I configured radius server in my X435-24T-4S switch .After radius configuration only primary radius is working,switch is not sending request to secondary radius server as well local account login also not working after radius configuratio...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN