ExtremeSwitching (EOS) - Page 5 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

interface Link up and link down logs not generating in extreme switch.

HI everyone.I have two extreme X435-24T-4S model switch. i configured syslog in both switches. but one of the switch not generating any interface Link up and link down logs.in both switches i did the same configuration. can anyone plz help on this.<I...

Resolved! Enterasys B5 - Limit for Radius shared secret

Hello everyone,is there any limitation for the radius shared secret with the newest firmware on a b5? I get the error "invalid message authenticator - wrong secret?"We use a 32 letters and numbers secret. There a no special characters.Kind regards,

Mlag + vpex rings

Hello, I'm new here, I'm working on 2 x 5420F-48P-4XE, mlag config + manual vpex ring. (3x v400).Regarding the output, can someone confirm my config are ok. thanks

Differnece between Exos and voss

Hi Every one I'm new to the extreme network switches. I need a clarity on the EXOS vs VOSS. I have plan to deploy switches on core level and access level. kindly advice me which OS is best for deployment (Core and Access). And share me the best pract...

Resolved! X440 Getting ports 49 and 50 to function as data port with 1Gbps SFP

I have an X440 that has reached port capacity. I still have SFP ports 49 and 50 available but when I connect to those ports the status never changes to active, no combination of port configuration negotiation or speed makes the port functional. How c...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN