ExtremeSwitching (EOS) - Page 80 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

B5 & E1 STP Costs question

I am new to my network and am documenting physical connections and STP paths and noticed that there are different costs between the B5 and E1 products. I have some locations with mixed equipment and have noticed some odd paths due to the cost differ...

Received below SNMP TRAPs from X460 device and S4 device.

How can I know what these traps are ? 1.3.6.1.4.1.1916.1.1.6.6.3 <= X460 1.3.6.1.4.1.5624.1.2.43.1.6.1 <= S4

AP causing spanguard alerts

I'm having one AP starting to trigger spanguard alerts. Any ideas on what to look into? Not sure of the AP model (but it's the same model of 100s we have across campus) The switch is a B5g.

Extend VXLAN from OSPF to Static/Direct Connect Routed Network - L3 VXLAN Gateway needed?

We have a customer that would like to use VXLAN to extend some VLANs across their network. They have a mix of XOS and EOS equipment, X670-G2s, S4, N3/N7, etc. While working to configure VXLAN for their request, I realized that one VTEP will be in t...

Why do I get different output from the show vlan and the show config commands?

I'm trying to get a hold of my new system and coming from a Cisco background it can be kind of difficult at times. This is especially true considering the differences in the way VLANs are handled between Extreme/Enterasys and Cisco. The following i...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN