Monitoring Chassis and Module Status with SNMP of EOS (Enterasys) Devices

[Christoph]

I like to use PRTG for status polling of Enterasys switches, especially S-Series and Secure Stacks.
Are there any SNMP OIDs which represent the status of modules in a chassis or the global status of a chassis or switch?

Especially, I'm interested in module or stack member failures.

Kind regrads
Christoph

[Curtis_Parish1]

I personally do not think Netsight even handles stacks and modules well when it comes to loss of a card or member. Unless an alarm is generated by the device Netsight is blissfully unaware of a problem. Of course if the stack member or card never powers up at boot then an alarm is not generated.

[Christoph]

Hey Curtis, thank for your suggestion.
I also use traps, but with PRTG it's not the very best solution. And traps are not sent if line card or stack members don't come up after a reboot or power loss.

[Curtis_Parish1]

We use SNMP traps to detect the loss of stack members and modules.

[Paul_Poyant]

These should be helpful...

MIBs for N/S-Series Power Supply and Fan Tray Status
Displaying the CPU Utilization of the N/S-Series

MIB for determining SecureStack switch stack attributes
Viewing System Utilization on the SecureStacks

[Mike_Thomas]

I would review the the following.
entityMIB=1.3.6.1.2.1.47