ExtremeSwitching (EOS)
Questions and discussions about EOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! 7520-series GA time

Hi Sirsfor universal 7520 series I have some questions .GA time of 7520-48Y-8C & 7520-48T-6C is July-2023 , but GA time 7520-48YE-8CE is Nov-2023 ,so  GA time of 7520-48Y-8C & 7520-48T-6C is still July ?Why is there a need for an additional device th...

Terry_Yang by New Contributor III
  • 1814 Views
  • 2 replies
  • 1 kudos

Summit X650-24x 10g optical connection not active

Hi Experts:The 10g optical link from our device to port 1 and 2 are not active. We have done the self loop test on both our device and the switch, the lights are all on. But when connect our device to the switch, the lights is off, and the "show port...

xiaosa_en by New Contributor
  • 956 Views
  • 1 replies
  • 0 kudos

Resolved! EXOS Stack Inter-VLAN routing configuration question

So our main stack consists of X460G2 stack master and some X440G2 between the master and couple of more X460G2.  The system stacking is a ring  using the 460G2 vim modules and the X440G2 rear stacking ports.  The X440's also have dual 10GbE licensing...

Joe10 by New Contributor III
  • 2305 Views
  • 2 replies
  • 0 kudos

Extreme x440

Hello,I have several Extreme x440-48p with very old firmware (ExtremeXOS version 15.3.1.4), I would like to proceed firmware upgrade. Are there any upgrade paths or any other things which I should to know?Thanks in advance. 

GTM-P2G8KFN