cancel
Showing results for 
Search instead for 
Did you mean: 

X450-G2 PoE issue

X450-G2 PoE issue

Giuseppe_Montan
Contributor
Good Morning, i have a switch X450G2 with only 1 powersupply,

the ports do not send the poe so I can not connect a device requiring poe like phones or tvcc

show inline-power

Inline Power System Information
Configured : Enabled
Power Usage Threshold : 70 percent
Disconnect Precedence : deny-port
X450G2-24p-G4.4 #

X450G2-24p-G4.4 # show version
Switch : 800595-00-04 1547N-40421 Rev 04 BootROM: 1.0.2.1 IMG: 30.1.1.4
PSU-1 :
PSU-2 : Internal PSU-2 800592-00-07 1609A-46319 Rev 07

Image : ExtremeXOS version 30.1.1.4 by release-manager
on Fri Jan 18 11:44:43 EST 2019
BootROM : 1.0.2.1
Diagnostics : 5.12
Certified Version : EXOS Linux 4.14.77, FIPS fips-ecp-2.0.16

Build Tools Version : exos-mips-sdk-2.3.4.1.3
X450G2-24p-G4.5 #



Thanks for your help

Giuseppe
4 REPLIES 4

Giuseppe_Montan
Contributor
Ciao, no change mooving the PSU in slot#1,
tomorrow i will open a ticket because i see kernel error is i do show log and the switch ( lab ) crash.

thanks for your help

Giuseppe

Ronald_Dvorak
Honored Contributor
Could you try to put the PSU in slot#1 ?

Giuseppe_Montan
Contributor
X450G2-24p-G4.2 # show power
PowerSupply 1 information:
State : Empty
PowerSupply 2 information:
State : Powered On
PartInfo : Internal PSU-2 1609A-46319 800592-00-07
Revision : 07
Input : 224.00 V AC
Output 1 : 55.05 V, 0.00 A (12V/715W Max)
Airflow Direction : Front to Back
Poll Interval : 60 s
Change Threshold : N/A
Change Action : N/A
X450G2-24p-G4.2 #

X450G2-24p-G4.2 # show inline-power stats
Timeout occured while retrieving information from hardware.

Ronald_Dvorak
Honored Contributor
Could you run "show power" and "show inline stats"

-Ron
GTM-P2G8KFN