2 Virtual Routers on 1 Port

[bw447]

Just an easy question.

I've created a new virtual router on an x460.
I have a working setup with 2 vr's on 1 port with multiple vlans (created on multiple vr's).
I pretty much just followed the Concepts Guide.
Everything works great, no problems.

My question is can i remove VR-Default from all edge ports?
What would the problem be with that?

[Tomasz]

Hi,

There is inter-vr routing available.
https://gtacknowledge.extremenetworks.com/articles/How_To/Routing-configuration-between-VR-s

Kind regards,
Tomasz

[bw447]

Ron, another quick question. So the x460 with both VR connect in to our WAN (x670-G2). If I enable OSPF on both VR do I need 2 uplinks to the x670, or is it possible to run ospf on both VR on only 1 port?

Thanks for your help with this!

[bw447]

Thanks Ron for the Info!

[Ron_Huygens · Accepted solution]

There is absolute no problem with removing the VR-Default from all edge ports.
Actually the ports will be following the VR where the VLAN is created in.