I have a setup of more than 100 X440-48p switchs firmware 15.6.4.2. There are two switches which (if the power cut off and return back) do not boot till unplug and plug the power cable. Is there any advice! Thanks in advance.
We are getting average of 1 pps and peaks of 60 pps of these packets, from Wireshark trace. Please kindly share information on what is the cause of these broadcasts and how to minimize the frequency. TIA. Screenshots of Wireshark decode and IO gra...
Dear. Would I like to know how I configure a rate shaping? I need to ensure 2 Mbps for a network on a port with 1 Gbps bandwidth in a X480 Summit.
could you please guide me, how i can fix password is wrong in my extreme switch , i forgot which the password was? cus i have 25 switches type summiteX450-24DC in my notwork , and i cant remember the password one form them?
Hello, How can I disable password recovery and configuration removal through boot menu on Extreme Switches? Its a security risk as anyone can connect to the console port and undo all the configuration.
