I am planning to connect X770-32q with X460G2-48t-10G4. Configured port 97 as 1x40GB then connected fiber in 97 port of X770 and connected the other end fiber in X460G2 at port 54. But when i enable the link it doesn't come up on X460G2 switch. There...
Good day all,
Need some advice if you may - I have an X440 and I would like to create ACLs that limit certain protocol ports, like port 80 (http).
Please check my config below:
vlan 2 created
ports 1-10 added to vlan 2 untagged
meter created:
"cr...
