ExtremeSwitching (EXOS/Switch Engine) - Page 658 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

STP auto-bind not working as expected

I am currently working on a spanning tree example as per below. Its not how I would do it but the bit I can't workout is the auto-bind is enabled on this stp domain, yet when you look at all the ports on the Vlan that its bound too those ports are no...

What is the newest firmware version for the BlackDiamond 8810?

What is the newest firmware version for the BlackDiamond 8810?

Black Diamond 8810 Fan Operational MIB?

I'm setting up our monitoring system (nagios) and trying to set up checks for the fans on our extreme 8810s. I've browsed through the mib file for the XOS I'm running (15.6.x.x) and the MIB should be: .1.3.6.1.4.1.1916.1.1.1.9.1.2 (this is an ind...

Resolved! x460 empty port blinking amber

I have an x460-48P that someone reported a port that went down. So I investigated and saw on the switch CLI that the port was enabled and ready, but showed nothing connected to it, even though there was a cable plugged in. So we disconnected the ca...

ELRP loop warnings over a 2-Tier MLAG architecture

We are having a problem in our Data centre where we have multiple 2-tier MLAG setup between the 2 CORE’s and pairs of distribution switches. Two 480s connected to each other via ISC, ports 51,52 (lag L3_L4 lacp - Master port 51). Two BDs co...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN