Hi everybody, I need to know If there is any CLI command (or NetSight Applications tool) I can use to check a Securestack C3 switch for HW issues. I tried the various "show port ..." commands, but they only show if ports are admin and operationally ...
I am getting Logs" MM-A: Slot MMB: phd_eeprom_read_obj: Micro Controller returned nothing." from my core switch BD-20808 , can you please explain
We are looking at reworking our layout to start growing to have full redundancy. MLAG between 2x aggregation x670's Feeding each remote site with 1x 10gigabit uplink. We're good on that simple. MLAG between our L3 Extremes we plan to use for L3 Ro...
Hi, I have done a half of hitless upgrade procedure of BD8800 with following "show switch" output after that. Slot: MSM-A MSM-B * ------------------------ ------------------------ Current Stat...
Hello, Community! Thinking what would be the most effective way to connect the devices shown in the below topology (two X460s in the access layer connecting to one X670 in the distribution). 1. One approach would be to interconnect them via EAPS dom...
