ExtremeSwitching (EXOS/Switch Engine) - Page 816 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Need help : Port 80 is not closed.

Create Date: Mar 13 2013 3:06AM Hi everyone, I have a Extreme Summit x450A.. I was trying to disable the http web access to the switch since I am using https to access to the switch. However, after I issued "disable web http" command, save config...

How do I configure ingress and egress rate-limiting traffic?

Create Date: Mar 3 2013 10:00AM I found this solution and I believe it is worth sharing: How to set the rate-limit on egress and ingress port? Platform: Summit X450, X450a, and X450e, X460, X650, X440, X670, X350, X150, X480 and most BD8k platform...

Fix on howto increase the number of IPv6 (BGP) route entries in HW LPM

Create Date: Mar 10 2013 1:44PM Hi, As some of you may have seen, the current IPv6 BGP Tablesize is growing quickly currently. That might give messages in your LOG on the switch stating that it can't download a route into HW LPM. ( HW LPM table...

NETLOGIN MAC BASE

Create Date: Mar 5 2013 9:02AM HELLO, can some one help me about NETLOGIN MAC BASE authentication configuration and sceanrio. i want to authenticate my 10 host laptop mac address in local radius as extreme switch.please share configuration and a...

Create ACL

Create Date: Mar 11 2013 7:43PM How do I create an ACL to limit access on a port to a predefined list of ip's? Thanks (from Vince_MacNeil)

Top Kudoed Authors

User

Count

28

26

18

18

17

GTM-P2G8KFN