ExtremeSwitching (EXOS/Switch Engine) - Page 818 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Anyone else haveing trouble with stacked X440-48p's and "dead" ports?

Create Date: Oct 16 2013 6:22PM Hi all, We've had ongoing problems with ports on our X440-48ps going "dead". The port will show Link and auto negotiate, and 'show fdb' will list a mac address, but hosts attached to the port aren't able to receive...

Open flow ?

Create Date: Oct 9 2013 9:15PM Does any one know which switch model that support open flow and open stack (from Hsu_LiPing)

M-LAG between 4 agregation switches

Create Date: Oct 5 2013 4:26PM Hello, I have a campus network composed of many access switches (X460) in buildings, on two sides of a street. I would like to set up an agregation layer composed of four X670 switches (two on each side of the stre...

Extreme Inline-Power for Cisco IP Phone 7960

Create Date: Sep 30 2013 12:30PM Good morning, I'm changing Cisco 4006 for some Extreme Switches PoE. After the change I notice that Cisco IP Phone 7960 do not turn on via PoE. I connected it back to Cisco 4006 PoE port and check the corresponding...

Route Policy - Match All matching any?

Create Date: Oct 4 2013 2:18PM Hi all, I have the following issue, tested in both 15.2 and 15.3 EXOS, am I doing something wrong? configure bgp neighbor 10.10.112.103 route-policy out out-filter-1 out-filter-1.pol: entry OutFilter1 { if...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN