Create Date: Apr 16 2013 6:20AM
Hi,
I am implementing EAPS with 3 Rings. Can someone help me the configurations.
Here's the diagram. Thanks.
https://
-qw (from Carlo_Bons)
Create Date: Apr 9 2013 6:49PM
Hello.
I have one Summit x450a-24t which doesn't boot. I tried to boot pri/sec images (boot 1/boot 2) and diagnostic (boot 3/boot 4) from BootPROM, but unsuccessfully. Boot hangs on "Failed to determine exact hardwa...
Create Date: Apr 29 2013 9:48AM
Hi All,
I'm still a relative newbie with Extreme Networks, having previously been a Cisco and 3Com guy, and there are a few things I'm getting used to still.
I recently discovered that Spanning Tree is disabled by ...
Create Date: May 3 2013 2:16PM
HiI'm not quite getting ACL's so far. I have a few vlans all with ipforwarding enabled and ips for the vlans.vlan 1 10.10.1.0/24vlan 2 10.10.2.0/24
I was hoping the following would allow ping from vlan 1 to vlan 2 b...
Create Date: Apr 29 2013 9:29PM
Hi all,When I connect to a Extreme switch using the linux (ubuntu) native telnet/ssh client, the page separator ("Press to continue or to quit:") is not "erased" when going to the next page. This is quite annoying ...
