Is this possible configuration. Same port 1,3,5 mirror to two different monitor ports "mirror_one" and "mirror_two" ?create mirror "mirror_one"configure mirror mirror_one to 10enable mirror mirror_oneconfigure mirror mirror_one add port 1 ingress-and...
When configuring MVR policies, what is the difference between Static Group range and MVR address range?Do you use the devices ip addresses or a multicast address in these policies?
Hello, colleagues!X590 stack was with 22.6.1.4.Issues began when tryed to upgrade stack directly to 30.7.2.1"Installing to Slot-2(Backup): .....Error: Failed to install image on Slot-2 - tar: corrupted data"Normally upgraded to 30.2.2.17, but again i...
Hello,I'm trying to configure radius authentication in NAC and I'm getting this failure in Events. (Rejected management login to switch XX.XX.XX.XX, User: XXX, due to: pap: Cleartext password does not match "known good" password)I have followed this ...
I'm new here and starting to learn EXOS. I working on a simple set up/lab, 1 Extreme switch (GNS3 lab - EXOC VM 30.5.1) and two PCs (VLAN 10=172.16.10.2/24 & VLAN 20=172.16.20.2/20). All I'm trying to do is to have one PC ping the other. I have ena...
