ExtremeSwitching (EXOS/Switch Engine) - Page 856 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

MLAG with 2 X650 to 1 Juniper MX5

Create Date: Sep 12 2012 11:59PM Hi, Has anyone had any experience with setting up MLAG between 2 Extreme X650 and 1 Juniper MX5. So interface ge-1/0/8 and ge-1/0/9 on the MX5 connect into port 1 on X650 switch A (core1) and port 2 on X650 switch...

8810, bcmRX - 40-60% CPU utilization

Create Date: Sep 4 2012 8:00AM Hi, While analyzing issues we are facing i came across very high CPU utilization on one of our Blackdiamond 8810 switches. I don't have to output from top handy but bcmRX was using between 40-60% of the CPU. We trie...

Stacking after new image on master.

Create Date: Sep 18 2012 3:02PM After I configure the stacking on 5 Summit X440-48p switches, I upgraded the image on the master and rebooted. Will the image sync with all other nodes? Do I need to sync manually or enable stacking again. When I ...

Default username and password for failsafe account for Summit X450e-48p

Create Date: Sep 19 2012 5:45AM Hi, Can anybody tell us default username and password for failsafe account for Summit X450e-48p Network Switch and how to login into this account. Thanks, (from Rajesh_Panchal)

DHCP Server

Create Date: Sep 17 2012 9:12PM Hello I have a extreme switch which has a super vlan with mutiple vlan's. Is it possible to run a dhcp sever from the switch for each of the sub vlans. I have tried adding one to each sub vlan but i keep getting a ...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN