ExtremeSwitching (EXOS/Switch Engine) - Page 861 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Limiting bandwidth usage to remote sites

Create Date: Aug 9 2012 9:43AM I have a couple of questions that I was hoping to get clarified as to how they work. I am completely stumped and any help would be greatly appreciated. When applying a static ACL policy (i.e. - bandmax.pol) on a Sum...

summitx 440 and 350 cpu spec

Create Date: Jun 25 2012 7:29PM Did anyone fell 440 slowly than 350, when i use console port telnet to 440 and 350 i fell 440 always slowly than 350,so did anyone can tell me 440 and 350 cpu spec (from Hsu_LiPing)

ACL and STP

Create Date: Aug 8 2012 12:54AM when I apply a "permit all packets" rule, I get the warning: Note: An unconditional PERMIT action on an EAPS or STP blocked port will result in a loop. Adding an explicit match criteria such as ethernet-type will avo...

Stacking+Firmware(x440+x450)

Create Date: Jul 5 2012 3:58AM Hi All, I have a stack of Summit x450e. One of the switch from the stack has just failed but I have a spare summit x440 switch. I would like to know if summit x440 can be stacked with x450? and if yes,from where...

External Powersupply EPS500 and Summit X450

Create Date: Jun 28 2012 1:05AM Hi, a customer told me, they tested the external powersupply, so they take off the power from the switch and they thought the eps500 take care for power. but the switch was going down. is there any configuration on...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN