ExtremeSwitching (EXOS/Switch Engine) - Page 866 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

An asterisk appears at the command prompt after the configuration of the switch been saved

Create Date: Feb 17 2012 8:02AM Hi all, Can any one of you know how to resolve the problem on having an asterisk appears at the command prompt 30mins later after the configuration has been saved. Apparently, the switch model that encountered this...

Bypassing link aggregation for a specific MAC address

Create Date: Jan 13 2012 9:25AM I have some Apple Xserves connected to a Summit X460, with their two internal ethernet ports in a LACP LAG. Xserves also have a IPMI based lights-out-management (LOM) device which shares the same physical ethernet po...

iSCSI issues

Create Date: Feb 22 2012 9:51AM Hello, I'm trying to setup iSCSI over an X670, between a Windows host and an Equallogic PS4100 array The Equallogic box is connected on a single gig port via a 1000T SFP, the Windows box has an Intel X520 10gig c...

Source IP Using PING

Create Date: Feb 29 2012 7:50AM Hi all, When running the ping command in XOS V12.2.1.1 how do I specify a source address. I am trying to ascertain if I have a routing issue and want to try and ping from the switch using a different source addre...

filtering dhcp with accesslists

Create Date: Mar 15 2012 4:10AM Hi folks, is it possible to filter out unwanted dhcp servers in a vlan with a accesslist? And if yes, may some one has a sample policy file (from schnuffel_duffel)

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN