cancel
Showing results for 
Search instead for 
Did you mean: 

Block all IPv6 traffic

Block all IPv6 traffic

gbs
New Contributor II
How can i block all ipv6 trafic in xos?

9 REPLIES 9

gbs
New Contributor II
i work at a very large campus.

A lot of routers are installed everyday without our knowledge.

I'm concerned with those routers acting as IPv6 dhcp-servers.

We have trusted ports well configured, but i suspect that it doesn't work for IPv6.

Since we don't have IPv6 for users, i think that if we block it, that problem is solved for now.

Mrxlazuardin
New Contributor III
Hi Gerson,

Any specific reason to do this on L2 level? Is IPv6 traffic inside a client VLAN only matter to you since it will not gatewaying if you don't put IPv6 address on your L3? I think the L2 way only works if all your clients connected directly to your controllable switch, if not L3 way is more simple since the traffic will only reach your controllable switch for gatewaying or accessing different connected ports clients (or client switches) on the same VLAN.

Best regards,

OscarK
Extreme Employee
Exos does not work that way, almost every acl action is done on all packets, no matter if it is l2 switched or routed.

OscarK
Extreme Employee
ACL is done in Hardware (asic).
GTM-P2G8KFN