changing slot number in stack

[Gene_Fontanilla]

On my current working stack, i have 2 x670v and 2x440. I added another 2 x670v to the stack, I want to change the slot numbers of the current 2 x440 to a different stack number. By doing this, will the config also adapt to the change? or would i need to reconfigure it?

Setup is:

x670v <- Slot 1
x670v <- Slot 2
x670v <- Slot 5
x670v <- Slot 6
x440p <- Slot 3
x440p <- Slot 4

What i want:

x670v <- Slot 1
x670v <- Slot 2
x670v <- Slot 3
x670v <- Slot 4
x440p <- Slot 5
x440p <- Slot 6

[Alexandr_P]

You can see on front panel Master-node = 1
You can disconnect node on which you want to change stack#, in pending-AAA type REBOOT AS MASTER-CAPABLE, after reboot you can configure this node.

[PARTHIBAN_CHINN]

firmware version
same partition ---could you check this
master capability enabled or disabled
license ?

[Gene_Fontanilla]

Thank you for all the replies, now I am encountering issues with my x440s not finding the master node, and getting stuck at pending-AAA, I have checked all possible cause of this bug, but I haven't been successful, I have tried rebuilding the stack numerous times, but it still can't find the master node, even though i can see it in the "show stacking"

any advice on this?

[JohanHendrikx]

Beware thats the you might change youre configuration when you change slot numbers.

[Alexandr_P]

Then Like for you )))