Does G2 series support load sharing based on inner L3 filds in the MPLS terminated packet?

[Alexander_Roma1]

Dear colleagues!
Does G2 series support load sharing based on inner L3 filds in the MPLS terminated packet?

[Alexander_Roma1]

Hello Nikolay!

It is true for G1 series switches.
But in the documentation on 30th version of XOS we can see:

Custom Algorithms...
* MPLS packets—Uses the top, second, and reserved labels and the source and destination IP addresses.

[Necheporenko__N]

Hello Alexander,

As far as I remember it is supported with algorithm "custom", even non-terminated MPLS packets are hashing with the following rules:

• For L3 payload (i.e. not VPLS or VPWS), the IP source and dest addresses and the labels are used for hashing.
• If the payload is VPLS/VPWS, only the labels are used for hashing. Since these have an inner L2 frame, the hardware can’t look that deep inside to see the L3 fields.

Best Regards,
Nikolay