ExtremeSwitching (EXOS/Switch Engine) - Page 421 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Version 22.1.1.4 default tacacs shared secrets change daily

Just started to upgrade to 22.1.1.5 and noticed that our daily archive picks up a change to the switches configuration everyday..... This seems to be caused by the shared secrets changing everyday. We are upgrading so that EMC will work for changi...

VPLS+MLAG+ISC

Hi all. Config. We have two X670 with MLAG and MPLS/VPLS enabled, some ports use MLAG. We have shared group of 4 ports for ISC link between switches, also have customer vlan V100 on both switches, vlan V100 does not added to any MLAG ports, only to...

Spanning Tree MSTP region and general STP question

Hi all, I’m getting ready to decommission some Summit x450e’s and replace them with x460-G2’s. As I’m not very familiar with MTSP or Extreme in general and I’m looking for a little assistance. My plan is to create a trunk between the new 460 stack...

x460-g2 swtich failed again and again

is anyone help...i have x460-g2-48p and x440-g2-24p and both are in stacking... but x460 switch failed 4 times,,i rasied request from RMA i got new switch and configured the same, its working for one month then again failed.. this issue happen 4 time...

problems with ip route default

Hello. I have a route table. All routes are directed to 10.106.0.1 as the default route, but I would like to route a single VLAN to another route. Could you please tell me about the things I need to do about the subject? Thank you. Ori Destination...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN