Hi, sometimes i get confused probably because i am missing something very obvious but im unable to see it.
For some reason a port configured as an edge port is initiating topologies changes, the port configuration is as follows:
configure stpd s0 ports link-type edge 3:32 configure stpd s0 ports edge-safeguard enable 3:32 configure stpd s0 ports bpdu-restrict enable 3:32 on the switch logs i see the following:
Slot-1: [s0:3:32] Topology Change Detected locallyI have 802.1w configured on my switches and they are on version 22.x. I dont understand why this is happening, from my understanding of 802.1w only non-edge ports that move to forwarding state cause a topology change. So why am i seeing this on my logs a topology change from an edge port? Can anyone enlighten me?
