ExtremeSwitching (EXOS/Switch Engine) - Page 345 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

extremePortEgressRateLimitTable-implementation in firmware

Anyone know when the extremePortEgressRateLimitTable snmp-value is going to be implemented? I need it We use rate-limit egress on switchports to control bandwidth, and policy+meters on ingress.. Ideally, I need a way (through snmp) to query many sw...

Stack only showing hal process for one node

We have a stack of 2 X450-G2-48P switches running 22.2.1.5. A while back one node failed as the hal process consumed 98% of the CPU and they switched roles. The master became the backup and vice versa. I am noticing today that the hal is consuming hi...

Enable SummitStack-V on single switch?

In the past, our best practice was to enable stacking on everything (including single switches), allowing for future additions to the switch without having to suffer an outage and reconfiguration. It seems that when using 10Gb stacking on a 460-G2, u...

Extreme equivalent of trunking

I am having difficulty understanding how multiple vlans are transported between extreme switches (not stacked) and how they are physically cabled. With cisco i create two trunk ports directly connected between switches and pass multiple vlans between...

S Series VXLAN Best Practice

Hi Community We are in the process of configuring VXLAN's between three DC's. All three DC's utilizes S8 core switches (S180 Blades) Essentially allowing L2 vlans across the l3 underlay. The VXlan tunnels is all working as expected, using OSPF VXLA...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN