Extreme stack no management access
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-05-2014 10:39 PM
I need help with configuring external access to my Extreme stack. The stack consists of X450e-48p (master), X650-24x (secondary).
I need help with making the vlan IP accessable from the internet. I have tried everything and cannot get the switch to allow any traffic at all on these IPs. ping returns destination unreachable.
Here is my show vlan:
Slot-1 x.4 # show vlan
---------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------
Default 1 x.xx.xxx.88 /26 -----------T----------- ANY 11/18 VR-Default
Internal 4092 xx.x.x.2 /24 ----------------------- ANY 4 /5 VR-Default
iSCSI 4094 xx.x.xx.2 /24 ----------------------- ANY 3 /5 VR-Default
Mgmt 4095 xxx.xxx.xx.4 /24 ----------------------- ANY 1 /1 VR-Mgmt
Unused 4091 ------------------------------------------- ANY 0 /38 VR-Default
Ping returns nothing from within the switch:
Slot-1 x.5 # ping 8.8.8.8
Ping(ICMP) 8.8.8.8: 4 packets, 8 data bytes, interval 1 second(s).
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
--- 8.8.8.8 ping statistics ---
0 packets transmitted, 0 packets received, 0% loss
round-trip min/avg/max = 0/0/0 ms
The mgmt IP is inaccesable from the internet via all protocols; ssh, telnet and web. All of these protocols are enabled globally on the switch.
The iproutes for VR-Mgmt are:
Slot-1 x.7 # show iproute vr vr-mgmt
Ori Destination Gateway Mtr Flags VLAN Duration
#d xxx.xxx.xx.0/24 xxx.xxx.xx.4 1 U------um--f Mgmt 0d:7h:53m:29s
IP stats on the mgmt interface seem to be receiving packets, but not sending anything:
Slot-1 x.11 # show ipstats mgmt
Router Interface on VLAN Mgmt
inet xxx.xxx.xx.4 netmask 255.255.255.0 broadcast xxx.xxx.xx.255
Stats: IN OUT
37374 0 packets
3854762 0 octets
311 0 Mcast pkts
12183 0 Bcast pkts
0 0 errors
23153 0 discards
0 unknown protos
The router for my management IP can be pinged from my office connection:
Pinging xxx.xxx.xx.1 with 32 bytes of data:
Reply from xxx.xxx.xx.1: bytes=32 time=36ms TTL=249
Reply from xxx.xxx.xx.1: bytes=32 time=63ms TTL=249
However, from the switch it does not ping:
Slot-1 x.13 # ping xxx.xxx.xx.1
Ping(ICMP) xxx.xxx.xx.1: 4 packets, 8 data bytes, interval 1 second(s).
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
The same happens with the VR-Default vr. It's IP address is also inaccessable, however is accessable from servers connected to the Default vlan.
Any help would be greatly appreciated, I am at a loss as to how to get the management port accessable from the internet.
Thanks.
I need help with making the vlan IP accessable from the internet. I have tried everything and cannot get the switch to allow any traffic at all on these IPs. ping returns destination unreachable.
Here is my show vlan:
Slot-1 x.4 # show vlan
---------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------
Default 1 x.xx.xxx.88 /26 -----------T----------- ANY 11/18 VR-Default
Internal 4092 xx.x.x.2 /24 ----------------------- ANY 4 /5 VR-Default
iSCSI 4094 xx.x.xx.2 /24 ----------------------- ANY 3 /5 VR-Default
Mgmt 4095 xxx.xxx.xx.4 /24 ----------------------- ANY 1 /1 VR-Mgmt
Unused 4091 ------------------------------------------- ANY 0 /38 VR-Default
Ping returns nothing from within the switch:
Slot-1 x.5 # ping 8.8.8.8
Ping(ICMP) 8.8.8.8: 4 packets, 8 data bytes, interval 1 second(s).
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
--- 8.8.8.8 ping statistics ---
0 packets transmitted, 0 packets received, 0% loss
round-trip min/avg/max = 0/0/0 ms
The mgmt IP is inaccesable from the internet via all protocols; ssh, telnet and web. All of these protocols are enabled globally on the switch.
The iproutes for VR-Mgmt are:
Slot-1 x.7 # show iproute vr vr-mgmt
Ori Destination Gateway Mtr Flags VLAN Duration
#d xxx.xxx.xx.0/24 xxx.xxx.xx.4 1 U------um--f Mgmt 0d:7h:53m:29s
IP stats on the mgmt interface seem to be receiving packets, but not sending anything:
Slot-1 x.11 # show ipstats mgmt
Router Interface on VLAN Mgmt
inet xxx.xxx.xx.4 netmask 255.255.255.0 broadcast xxx.xxx.xx.255
Stats: IN OUT
37374 0 packets
3854762 0 octets
311 0 Mcast pkts
12183 0 Bcast pkts
0 0 errors
23153 0 discards
0 unknown protos
The router for my management IP can be pinged from my office connection:
Pinging xxx.xxx.xx.1 with 32 bytes of data:
Reply from xxx.xxx.xx.1: bytes=32 time=36ms TTL=249
Reply from xxx.xxx.xx.1: bytes=32 time=63ms TTL=249
However, from the switch it does not ping:
Slot-1 x.13 # ping xxx.xxx.xx.1
Ping(ICMP) xxx.xxx.xx.1: 4 packets, 8 data bytes, interval 1 second(s).
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
The same happens with the VR-Default vr. It's IP address is also inaccessable, however is accessable from servers connected to the Default vlan.
Any help would be greatly appreciated, I am at a loss as to how to get the management port accessable from the internet.
Thanks.
12 REPLIES 12
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-14-2015 11:44 AM
I Agree with Paul, your initial configuration was correct. By default XOS forwards all pings out of VR-Default, so pinging an Interface connected to VR-Mgmt will return an error unless you explicitly tell the ping to point to VR-Mgmt.
And for your last question, No, you cannot change the tag on the Mgmt VLAN.
And for your last question, No, you cannot change the tag on the Mgmt VLAN.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-14-2015 07:39 AM
can we change mgmt vlan id 4095 to 100 , is it possible?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-14-2015 07:38 AM
Hi Paul
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-06-2014 05:08 PM
you're welcome
