cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Extreme switch restarted..Working fine with no issues..But why it is restarted..?

Extreme switch restarted..Working fine with no issues..But why it is restarted..?

ComraDe
New Contributor III
I have a x-460-48t switch and it got restarted once.Now itis working fine.I doesnt have any logs at the time of issue but captured logs post restart..Can anyone help me out.It shows below error messages on logs.

07/29/2014 05:14:58.68 Slot-1: shid_eeprom_read:line 4522:I2C I/O operation failed. Err 14507/29/2014 05:14:58.68 Slot-1: select_mux:line 250:I2C I/O operation failed
07/29/2014 05:14:58.68 Slot-1: shid_eeprom_read:line 4522:I2C I/O operation failed. Err 145
07/29/2014 05:14:58.68 Slot-1: select_mux:line 250:I2C I/O operation failed
07/29/2014 05:14:58.68 Slot-1: shid_write_ZL30142_reg:line 9510:I2C I/O operation failed. Err 145
10 REPLIES 10

ComraDe
New Contributor III
Thanks John...Its gud to hear that there is alws some persons here to help us.....I will check the release notes as well...

John_Kaftan
New Contributor III
Take a look in the release notes of all of the versions of FW between what is current and where you are now. Do a search for "reset" or "eeprom" to see if you can find the specific error in the release notes of what was fixed with that particular release.

Chances are the issues has been discovered and there has been a fix already.

John

ComraDe
New Contributor III
Thanks sumit.... ļ™‚

Sumit_Tokle
Contributor
If you are running base software version or unsupported software(EXOS 12.5) then please upgrade the switches and then see if you are facing any issues.
GTM-P2G8KFN