Fall routing on X460

[Yurij]

today started having problems with routing on the X460-48x
is lost "IP Forwarding Enabled" on interfaces, in consequence of which falls OSPF ...

after the command "enable ipforwarding" - all restored
firmware 15.3.3.5 v1533b5-patch1-9

can anyone know why and what to do?

[Sumit_Tokle]

Below is the link for the document,

https://www.extremenetworks.com/wp-content/uploads/2014/06/BP001-SNMP-Best-Practice-Recomendations-r...

[PARTHIBAN_CHINN]

There was an Official document released in extreme website For snmp best practices . 3 months back this issue was hot but now it's a known issue. I would recommend to follow snmp best practises as per extreme to avoid this issue reoccurring .

[Andre_Brits_Kan]

We had the same problem today with Code version 15.4.2.8
We will try and disable the default SNMP community string
I will provide more feedback once we have tested this.

Thank you

[PARTHIBAN_CHINN]

It changes the ttl value to the switch internally. Reboot will fix it.bgp neighbour may not come up due to change in ttl value of the switch.