Fall routing on X460

[Yurij]

today started having problems with routing on the X460-48x
is lost "IP Forwarding Enabled" on interfaces, in consequence of which falls OSPF ...

after the command "enable ipforwarding" - all restored
firmware 15.3.3.5 v1533b5-patch1-9

can anyone know why and what to do?

[Dave_E_Martin]

I forgot to mention, enable ipforwarding on loopback vlan didn't seem to work, (it worked on the other vlans) and in any case, we didn't trust the configuration and rebooted without saving changes. Everything was fine after reboot. I did a showtech before rebooting, but I haven't gone through it yet to see what else may have been altered.

[Sumit_Tokle]

Nice to hear that the issue got resolved.

[Yurij]

Thank you very much, snmp really was thrown into default and removed access list
after the ban on access to SNMP - the problem stopped

[PARTHIBAN_CHINN]

Dave this issue looks new. Recent study has revealed issue occurs with latest patch version in flavours of 15.x versions.might be code behaviour with snmp has. Changed which needs to be corrected.

[Sumit_Tokle]

To see what default configuration present on switch regarding the SNMP, execute the command: "show configuration snmp detail"

To see all the SNMP community on switch: "show snmpv3 community"