Firmware update kills SSL?

[Lance_Gropper]

When we recently upgraded our X450 stack, we found the SSL module was not loaded on the backup configuration. Do we just install it the same way as the primary firmware, or will it bung the firmware?

[Lance_Gropper]

Many thanks to you all.

[Henrique]

Hi,

When you upgrade EXOS, you have to load again the SSH module to the newer version.

[Ronald_Dvorak]

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-obtain-and-install-ssh-module

Yes the system will know that it's just a module and not the main OS.

[Lance_Gropper]

Before the upgrade: 15.3.5.2. After the upgrade: 15.3.5.2. Backup was running 14.6.something. The question isn't about synchronizing - it's about installing. Current boot has no SSL - the procedure according to the manual is identical to flashing XOS onto the switch - if I do this with the SSL module, is it going to corrupt the OS? i.e. does it know it's a module and not the entire OS?