How can I remove the number after switch name?

[Ali_Askari]

I have connected to the switch using a telnet session. The prompt that I have looks something like this:

switchName.1 #

After issuing a command the number right after the switch name increments. So the prompt is:

switchName.2 #

For different reasons I don't want to see that number. Is there a way I could remove that number?

[Drew_C]

Hi Ali,
Welcome to The Hub!

Unfortunately, there is no way to disable the command count on the CLI.

[Henrique]

Hi Ali,

When you login into the switch it starts with #1 that represents the next CLI number/position in history buffer.

As far as I know there is no CLI to clear or disable this counter.

If you logout/login you can get the initial value #1

[Ali_Askari]

Hi Henrique,

Thanks. Yes, I figured it out but I was hoping there is an easier way.

[Jairo_Rojas_Her]

Are the number of commands you've executed on the switch.

[StephenW]

Currently there is no way to remove it. Sorry