cancel
Showing results for 
Search instead for 
Did you mean: 

How do I export the default route, to a neighbor, via OSPFv3?

How do I export the default route, to a neighbor, via OSPFv3?

Rom1
New Contributor II

Hello!

How do I export the default route, to a neighbor, via OSPFv3?

Analogous to the team from Cisco: default-information-originate always

ExtremeXOS version 15.5.2.9 v1552b9-patch1-5

3 REPLIES 3

Gabriel_G
Extreme Employee

There is:
enable ospf originate-default always

But there is no equivalent for OSPFv3 at this time it appears:

https://documentation.extremenetworks.com/exos_commands_31.7/downloads/EXOS_Command_Reference_31.7.p...
 

Rom1
New Contributor II

The document is from April 2022, but there is no support for "originate default" in OSPFv3. This is very strange.

Chris_H
Extreme Employee

Hi,

Usually route export on EXOS is done using "enable <protocol> export <route-origin> <metric> etc..".

More info can be found in the command reference guide to this: https://documentation.extremenetworks.com/exos_commands_16/EXOS_16_2/EXOS_Commands_All/r_enable-ospf...

 

15.5 is end-of-life and to my understanding there was a change in OSPFv3 stack in 16.2, so behavior may be slightly different

 

 

 

edit: I was reading too fast.. you were asking about the default route.. I don't think that this has been implemented, so this would require a feature request via the account team, but would not be implemented in 15.5

GTM-P2G8KFN