How to configure two vlan in one switch to communicate without using the tagging port

[zahirtalib]

Hi Guys,

I want to know it is possible to configure two vlan in one switch to communicate without using the tagging port?

[Dennis_Newman]

Great article, and I think I understand most of it, but am very new to vlans and am still learning.
Trying to communicate between vlan 10 client 1 with ip 10.10.10.xx (internet gateway 10.10.10.1) and vlan 20 client 2 with ip 192.168.3.xx (internet gateway 192.168.3.1)
so I'm not quite positive what to put in my "configure vlan v10 ipaddress" and "configure vlan v20 ipaddress" to still allow the two clients to access their internet connections.

Thanks
Dennis

[zahirtalib]

Hi All,

Thanks You!!!

[Ronald_Dvorak]

I like it 

[StephenW]

Hello everyone,

I added more detail to the gtacknowledge article that Jan Jetten-Kalthoff referenced to. Let me know what you think.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-inter-VLAN-routing-in-EXOS/

[Ronald_Dvorak]

Could you check whether the client in VLAN 20 has 192.168.3.251 configured as his default gateway and the client in VLAN 10 use 192.168.7.1 as default gateway ?

Could you ping the clients in the different subnets from the switch ?

-Ron