How to view IP address with known MAC address in EXOS

[shashank_sharma]

what should i do ? if i know the MAC address of the user and i want to get his ip . If its possible then please give me command for extreme switches.

[Ronald_Dvorak]

"sh sharing" please

[Mateusz_Haba]

Port Summary
Port Display VLAN Name Port Link Speed Duplex
# String (or # VLANs) State State Actual Actual
========================================================================
1:39 (0002) E A 1000 FULL
========================================================================
Port State: D-Disabled, E-Enabled, F-Disabled by link-flap detection,
L-Disabled due to licensing
Link State: A-Active, R-Ready, NP-Port not present, L-Loopback,
D-ELSM enabled but not up
d-Ethernet OAM enabled but not up

[Ronald_Dvorak]

please do a "show ports 1:39 no" and post the output.

You'd see in the "show nodealias" output that you've posted that the port 1:39 has no entry for nodealias = 1:39(0/157) = the 0 = no entry, other ports are fine

[Tomasz]

You can also try "show nodealias mac ".

[Ronald_Dvorak]

"show nodealias" shows the config for nodealias.

If you'd like to check port details use "show nodealias ports all" or for one port "show nodealias ports 1:39"