cancel
Showing results for 
Search instead for 
Did you mean: 

OSPF on ISC port in mlag

OSPF on ISC port in mlag

gajanan
New Contributor
Can we run OSPF on isc vlan ? how the fail over will happen if layer 3 link connected to VRRP Master fail and we have only ISC port connection to VRRP backup
5 REPLIES 5

gajanan
New Contributor
thanks for ur reply..we have decided to use dedicated layer 3 connection between vrrp master and backup

Stephane_Grosj1
Contributor II
Then, what you need is to track the interface and failover VRRP when it's down. Look for VRRP Tracking in the User Guide, to confirm this is what you need.

gajanan
New Contributor
Hi guys.. thanks for your reply.. appreciate it..i mean Layer 3 connection between vrrp master n backup switch...we had issue last time when isp Link on vrrp master failed and traffic black holed at VRRP master switch as it dint had any l3 connection with vrrp backup

Stephane_Grosj1
Contributor II
I agree with Jacob, the ISC VLAN cannot be enabled for ipforwarding. However you could have a L3 vlan using the ISC PORTS.

That being said, I'm not sure to understand what you want to do. With MLAG, you can run VRRP in Master/Backup typical state, or use Fabric Routing to act in Master/Master. Losing the ISC connection is always a bad thing, that's why we recommend to have a LAG.
GTM-P2G8KFN