10-21-2020 05:45 AM
Hi,
I have a X460-G2 Switch which has 2 VRs configured on it and by mistake I configured a routerid on the VR-Default. Now, I am trying to remove the routerid from the VR-Default and leave only the VR-Production where it should be (this is the only VR that does OSPF on the Switch) and I couldn’t find anything until now. Does anyone had a similar issue? or does anyone have an idea how I could remove the routerid?
thanks in advance
Solved! Go to Solution.
10-21-2020 08:11 PM
Galimuna, Stephan,
The default behaviour of the EXOS is to use an automatic routerid asignement, so put it back as such with configure ospf routerid automatic
Example on GNS3:
* EXOS-VM.6 # configure ospf routerid 10.174.68.90
* EXOS-VM.7 # show conf ospf
#
# Module ospf configuration.
#
configure ospf routerid 10.174.68.90
* EXOS-VM.8 # configure ospf routerid automatic
* EXOS-VM.9 # show conf ospf
#
# Module ospf configuration.
#
* EXOS-VM.10 #
Let me know,
Mig
10-21-2020 11:11 AM
galimuna,
If there is only L2 on the VR-Default, there is no impact.
You didn’t enabled ospf on the VR-Default.
You can set the routerid to another value (1.1.1.1 for example).
I didn’t checked the commands to remove the routerid.
It should be something like unconfigure, delete or disable
Mig
10-21-2020 08:29 AM
This is the config of the other Switch:
#
# Module ospf configuration.
#
configure ospf vlan ISC priority 0
configure ospf vlan ISC_HELPER priority 0
#
# Module ospf configuration on virtual router VR-Production.
#
virtual-router VR-Production
configure ospf routerid 10.174.68.91
enable ospf
create ospf area 0.0.0.3
10-21-2020 08:26 AM
Hi Miguel-Angel
the issue is this, I have on one Switch 2 VRs, one is VR-Default and VR-Production. On VR-Default is only L2 Switching but on VR-Production I have L3 and OSPF. By mistake I configured the routerid on VR-Default and VR-Production. I need to delete the routerid from the VR-Default configuration.
This Switch has an ISC with another switch which has only on VR-Production the routerid.
This is my configuration:
# Module ospf configuration.
#
configure ospf routerid 10.174.68.90
configure ospf vlan ISC priority 0
configure ospf vlan ISC_HELPER priority 0
#
# Module ospf configuration on virtual router VR-Production.
#
virtual-router VR-Production
configure ospf routerid 10.174.68.90
enable ospf
create ospf area 0.0.0.3
….
Thanks for the replay
10-21-2020 08:12 AM
galimuna,
It is no clear what you’ve done/ask.
Can you share the output of “show conf ospf”
?
Mig