run diagnostics extended - not running

[Stanley_Riley_J]

Summit x450e-48P - run diagnostics extended command not doing anything but rebooting switch and returning me back to the switch login prompt. When I run sh diagnostics, it shows that the diagnostics passed but back in November of 2012.

Any ideas?

Thanks,
Stan

[Tripathy__Priya]

Does it show the diag has failed the test? or something similar to that at any point?

[Jimmy_Sands]

What happens when after it reboots you run

show diag

[Tripathy__Priya]

Continuing with what my colleague Praveen has to say, please attach the test run snippet to confirm further. In most likely hood it seems to be RMA though.

[Jacob__Praveen]

Stan,

You needn't run each individual test in the diagnostics at any point of time - the original command stays - run diag. Looking at what we are seeing here with your switch, I would most definitely think that this would need an RMA. However, please do paste the snippet of your test run here.

Thanks,
Praveen