ExtremeSwitching (EXOS/Switch Engine) - Page 268 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to connect the Management Port to the network

We always thought that the Management Port of the Summit Switches are totally independent from the switch ports, with an own VLAN and own Router interface. Because of this we choose the Management Port to connect the switches permanently to the centr...

Protecting Super vlan with Eaps

We are looking to protect a super vlan around our eaps ring and also have the ability to drop off sub vlans to other switches in the ring. Does anyone know if this is possible? Currently the limitation is that we cannot add subvlans to eaps b/c you ...

Resolved! [X440G2-48p-10G4] High CPU utilization caused by cliMaster process?

Hi Team, At customer site, we have an X440G2 Switch that encountered high CPU utilization caused by cliMaster process (~30% in avg, ~70% at peak), even web https/https are disabled & no abnormal log observed as well. Could you please let me know wha...

Extreme 210 POE service port down

Dear expert, How to bring up the service port for the Extreme 210 POE switch? Extreme 210) #show serviceport Interface Status............................... Down IP Address..................................... 10.241.0.21 Subnet Mask.................

The Tacacs+ shared secret password supported special characters ?

Hello, I have a some question about configured the Tacacs shraed secret password. I was changed the Tacacs shraed secret password include special characters. below Old shared secret password : test!@# New shared secret password : test_123!@# But ...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN