11-28-2019 12:18 PM
Hello!
Why remote MAC isn’t using in local FDB of X590?
* leaf-3.117 # show bgp evpn mac
Src EVI-Idx MAC BGP Next Hop VNI ESI ESI-Port In Use Sequence
--- ------- ----------------- --------------- ---------- ------------------------------ ---------- ------ --------
L 777 d8:fe:e3:a8:5c:cc 777 Yes 0
R 777 90:e2:ba:26:b9:64 172.16.16.31 777 No 0
Session between X590 and Juniper QFX.
Routes work fine. MAC from direct session with QFX.
Could it be because EXOS using EVPN vlan-based service but JunOS using EVPN vlan-aware service?
Thank you!
11-29-2019 01:50 AM
Hello Alexandr,
Please update your switch to the latest EXOS 30.3 and check if the issue still persist, if yes raise a service request. It might be known internally CR xos0075694, but it is better to check.
Best Regards,
Nikolay