Slot-1: Login failed through SNMPv3 - wrong digest

[Darren_Saliva]

I swapped out a switch in my stack and now i am seeing this error message in the logs. I cannot find anything online for this specific log. Does anyone know what this means? The service thats trying to run snmp queries has always been able to before i replaced the switch.

[Bob_Maheu]

Hello,

Most likely there is an issue with the authentication piece of the SNMPv3 config. Make sure that the correct type (MD5/SHA) and password is being used.

You can try removing and adding your 'configure snmpv3 add user' line back into the config. Also check the 'configure snmpv3 add access' for the correct sec-level,

[M_Nees]

Hi Bob,

i opened a case in October 2016 - 01254530 (and this case is still open).

If you want to support me, have a look.

Thanks.

Regards

[M_Nees]

Some error with X440-G2 V21.1.1.4 and Netsight V7.0.6.

Any solution since thread startup ?

[Darren_Saliva]

The stack is a 2 switch stack

No IPv6

The new switch is now the master

15.5.3.4 patch1-6