SummitStack-V between X450-G2 & X460-G2 using 10GBE

[Johannes_Grewe]

Is it possible to build “SummitStack-V” between X450-G2 & X460-G2 using 10GBE.

Do I need anything else as the two Switchches and four SFP+ modules?

Licenses? what ever?

Cheers Joe

[Johannes_Grewe]

Thanks for your answer but??

You wrote “Licenses is important” do I need additional Licenses for SummitStack?

The StackingTool shows “VIMs required” but I want to use only two of the native 10 GbE ports. I

Greetings

Joe

[Alexandr_P]

Hello!

Yes - it’s possible.

You can check it here - https://stackingtool.extremenetworks.com/StackingTool/

Licenses is important if X450-G2 will be master capable (X460-G2 is preferred Master).

(take in mind that X450-G2 also exist with 1Gb uplinks - in this case you have no possibility to stack)

Other important things - have to be same EXOS versions (include patches), same image (primary/secondary), etc.

Thank you!