Upgrade Image
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-12-2015 07:03 AM
Hi,
I have a switch X440-48P running on image ver 15.2.1.5 on both Primary and Secondary and the use image was on Primary.
I have perform a firmware upgrade on the Secondary to image ver 15.3.1.4 and when the installation completed I selected use image Secondary and reboot the switch.
However, the LAN connection that was connected to this switch did not went up when the switch is up.
But when I selected back to the Primary and reboot the connection came back up.
Could you kindly advice what could be the problem?
I have a switch X440-48P running on image ver 15.2.1.5 on both Primary and Secondary and the use image was on Primary.
I have perform a firmware upgrade on the Secondary to image ver 15.3.1.4 and when the installation completed I selected use image Secondary and reboot the switch.
However, the LAN connection that was connected to this switch did not went up when the switch is up.
But when I selected back to the Primary and reboot the connection came back up.
Could you kindly advice what could be the problem?
8 REPLIES 8
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-12-2015 07:39 AM
Hi Wee,
I would suggest you to contact GTAC for further assistance on this issue.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...
Thanks,
Suresh.B
I would suggest you to contact GTAC for further assistance on this issue.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...
Thanks,
Suresh.B
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-12-2015 07:34 AM
Can we have a teamview session in 10 mins time? Do kindly provide me your email address so that i can send you the code. Thanks!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-12-2015 07:27 AM
Yes. How can we have a remote session?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-12-2015 07:21 AM
can you provide access to the switch?
Then we have to upgrade the exos to 15.3.1.4patch1-19 and follow easy setup.
just like new installation of stack.
Then we have to upgrade the exos to 15.3.1.4patch1-19 and follow easy setup.
just like new installation of stack.
