cancel
Showing results for 
Search instead for 
Did you mean: 

Upload configuration fails with TFTP read error

Upload configuration fails with TFTP read error

Yuki_Nakamura
New Contributor II

Hi,

Today, when I has tried that upload the switch configuration to the TFTP server, the following error message is seen.
So I can not upload the switch configuration to the TFTP server.

 

Error: read error
.
This issue occurs on the combination of FreeBSD and G2 platform only.
When I used the upload configuration on X430(G1 platform), we cannot see any issues with the upload configuration.

-------------------------------------------------------------------------------------------------
tko-x440-2fers.1 # upload configuration 202.251.0.201 tko-x440-2fers_20191125.xsf vr VR-Default
Uploading tko-x440-2fers_20191125.xsf to 202.251.0.201 .........................
.................................... failed!
Error: read error
-------------------------------------------------------------------------------------------------

 

Do you understand that cause?

 

Best Regards,

Yuki Nakamura.

2 REPLIES 2

Yuki_Nakamura
New Contributor II

Hi,

 

The EXOS version is 22.7.1.

This issue also occurs on the G2 platform when using the tftp command.

 

Best Regards,

Yuki Nakamura.

ukomarla
Extreme Employee

Can you provide the EXOS version you are running?

Also, can you try: first do a ‘save configuration as-script’, followed by ‘tftp put’.

 

 

GTM-P2G8KFN