Upload configuration fails with TFTP read error

[Yuki_Nakamura]

Hi,

Today, when I has tried that upload the switch configuration to the TFTP server, the following error message is seen.
So I can not upload the switch configuration to the TFTP server.

Error: read error
.
This issue occurs on the combination of FreeBSD and G2 platform only.
When I used the upload configuration on X430(G1 platform), we cannot see any issues with the upload configuration.

-------------------------------------------------------------------------------------------------
tko-x440-2fers.1 # upload configuration 202.251.0.201 tko-x440-2fers_20191125.xsf vr VR-Default
Uploading tko-x440-2fers_20191125.xsf to 202.251.0.201 .........................
.................................... failed!
Error: read error
-------------------------------------------------------------------------------------------------

Do you understand that cause?

Best Regards,

Yuki Nakamura.

[Yuki_Nakamura]

Hi,

The EXOS version is 22.7.1.

This issue also occurs on the G2 platform when using the tftp command.

Best Regards,

Yuki Nakamura.

[ukomarla]

Can you provide the EXOS version you are running?

Also, can you try: first do a ‘save configuration as-script’, followed by ‘tftp put’.